RedNet HD32R

Description

The RedNet HD32R is a 1U, 19-inch rackmount Dante interface that allows Pro Tools|HD users to directly access all the advantages of the Dante digital audio networking system, including its exceptionally flexible network topology and high-quality audio interfaces. The Pro Tools system connects to the HD32R via standard Mini DigiLink ports.

Dual Ethernet ports with locking etherCON connectors are provided, offering multiple operating modes, including daisy-chaining and redundancy, confirmed by front panel indicators. Two independent power supplies with fault detection capability are included, with separate power input sockets (featuring retention clips) on the rear of the unit. Power status is indicated both remotely and on the front panel. The HD32R features a rugged, road-ready chassis with high internal build quality. Additionally, it offers a compact 1U rackmount format for full 32-channel I/O.

The HD32R acts as a 64-channel (32-in/32-out) digital I/O unit, functioning just like a standard interface and supporting a wide range of Pro Tools|HDX and HD cards. Compatible Pro Tools systems include Pro Tools|HDX, Pro Tools|HD Native, Pro Tools|HD Native Thunderbolt, and Pro Tools|HD TDM. Up to six HD32R units can be used with a Pro Tools|HDX system and three with Pro Tools|HD, enabling the maximum number of channels for either setup. Simply connect the HD32R to Pro Tools|HD using standard Mini DigiLink connectors.

The HD32R enables low-latency performance with Pro Tools|HD cards, bringing all the benefits of Dante audio-over-IP networking and the RedNet product range to a Pro Tools|HD system. The entire Dante product range, including RedNet’s outstanding analog and digital interfaces, can then be integrated into a Pro Tools|HD system, all connected via Ethernet cable.

From complex multi-room systems to individual setups, Dante and RedNet provide the ability to create a sophisticated and complete high-quality audio production environment over a standard Ethernet network, with HD32R serving as the bridge to any Pro Tools|HD system. Assign any available Dante source or destination via HD32R, and it will appear in Pro Tools just like any other Pro Tools-compatible interface, preserving traditional Pro Tools workflows.

Key Features:

• Allows Ethernet-based Dante audio network products to fully interoperate with Pro Tools|HD and Pro Tools|HDX.
• Ethernet and power redundancy with automatic failover and locking connectors.
• Provides the vital link for creating an extensive high-quality audio network using standard Cat 5e or Cat 6 cabling, bringing the latest advancements in digital audio networking to Pro Tools|HD.
• Cost-effectively enhances the quality and flexibility of audio I/O with RedNet interfaces.
• Allows multiple workstations to access the same interface hardware and I/O.
• No need to change the Pro Tools workflow—simple and logical RedNet I/O assignment to Pro Tools|HD inputs and outputs.
• Supports up to 32 I/O channels with Pro Tools|HD through a single DigiLink connection via RedNet HD32R.
• Additional Avid interfaces can be connected to the expansion ports.
• Upgrade to RedNet interfaces while remaining fully compatible with TDM or AAX-DSP-based plugins and saved sessions.
  

Detailed Specifications:

Digital Performance

• Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24-bit
• Clock Sources: Internal, Word Clock, Loop Sync (master or slave), or from the Dante network master
• External Word Clock Range: Nominal sample rate ±7.5
• Number of Channels: 32x32 at sample rates up to 96 kHz, 16x16 at 176.4 and 192 kHz

Rear Panel Connectivity

• Main Port: 1 x Mini DigiLink
• Expansion Port: 1 x Mini DigiLink
• Word Clock Input: 1 x BNC 75Ω port (switchable termination)
• Word Clock Output: 1 x BNC 75Ω port

Power Supply

• Power Inputs: 2 x IEC inputs with retaining clamps

Network

• Ports: 2 x etherCON NE8FBH-S (also compatible with standard RJ45 connectors)

Network Modes

• Redundant Mode: Allows the unit to connect to two independent networks.
• Switched Mode: Connects both ports to the integrated network switch, enabling device daisy-chaining.