RedNet A16R MkII
Description
RedNet A16R MKII is a 16-channel analog interface for Dante networks, featuring two channels of AES3 I/O.
Individual input and output channel level controls allow precise adjustment of all I/O levels via RedNet Control. With dual power supplies and primary and secondary etherCON network connectors, RedNet A16R MKII is perfect for critical path applications in recording, post-production, live sound, and broadcast. Built-in redundancy features enable seamless failover in case of power or network failure, ensuring reliability for system engineers.
Analog inputs and outputs are connected via four DB25 connectors configured for AES59 on the rear panel, while an additional pair of AES3 I/O is provided via male and female XLR connectors for added flexibility. The XLR input can accept DARS signals in addition to AES3. The Word Clock I/O on BNC connectors allows external devices to clock the RedNet A16R MKII, or alternatively, the RedNet A16R MKII can serve as the master network clock, synchronized to the external input.
Designed for permanent installations and repeated setup/tear-down scenarios, all connectors lock securely and remain terminated even under stress, ensuring worry-free installation and peace of mind in rack-mounted environments. Additionally, all Focusrite products come with a three-year warranty and award-winning customer support.
Key Features
- 16-channel bidirectional analog interface for Dante networks, with two-channel AES3 I/O.
- Precision A-D and D-A conversion with 119 dB dynamic range, flat from 20 Hz to 20 kHz (+/- 0.15 dB).
- Individual input/output level control via RedNet Control software.
- Dual power supplies with locking IEC inputs.
- Dual-locking etherCON connectors for Primary and Secondary network connections.
- Power and Ethernet redundancy with automatic failover switching.
- Front panel LED indicators for power status, network, sample rate, signal presence, and clock source.
- Sample rate conversion on AES3 inputs allows external equipment to operate at any sample rate.
- Analog I/O via four standard AES59 DB25 connectors.
- Digital I/O via a pair of XLR connectors (AES3).
- Rear-panel XLR connector can be used as a DARS input or a traditional AES3 audio input.
- BNC connectors for Word Clock input and output.
- Compact 1U chassis maximizes functionality in minimal rack space.
- AES67 and AES70 compliant.
- Compatible with SMPTE ST 2110 when used with Dante Domain Manager (sold separately).
- Fully interoperable with Focusrite RedNet, Red interfaces, and hundreds of Dante devices.
- Remote control via RedNet Control, with routing managed through Dante Controller.
Detailed Specifications:
Line Inputs
- 0 dBFS Reference Levels: +18 or 24 dBu (switchable)
- Frequency Response: 20 Hz - 20 kHz ± 0.1 dB
- THD+N: Below -100 dB (0.001) unweighted, 20 Hz - 20 kHz; input -1 dBFS
- EIN: -96 dBu A-weighted (typical)
- Signal-to-Noise Ratio: 120 dB A-weighted (typical)
- Converter Dynamic Range: 120 dB A-weighted (typical), 10 Hz - 20 kHz
Line Outputs
- 0 dBFS Reference Levels: +18 or 24 dBu (switchable)
- Frequency Response: 20 Hz - 20 kHz ± 0.1 dB
- THD+N: Below -100 dB (0.001) unweighted, 20 Hz - 20 kHz; 23 dBu input
- Signal Presence Noise: -94 dBu A-weighted (typical)
- Dynamic Range: 118 dB A-weighted (typical)
- Converter Output Dynamic Range: 120 dB A-weighted (typical), 10 Hz - 20 kHz
Digital Input Sample Rate Converters
- Sample Rate: 32 kHz to 216 kHz
- Gain Error: -0.3 dB
- Input Dynamic Range: Greater than 138 dB
- THD+N Inputs: Below -130 dB (0.00003)
- Latency: 11 to 45 samples (dependent on network and sample rate)
Digital Performance
- Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24-bit
- Clock Sources: Internal or Dante Network Master
- External Word Clock Range: Nominal sample rate ±7.5
Rear Panel Connectivity
- Line Inputs: 2 x DB25 connectors
- Line Outputs: 2 x DB25 connectors
- Number of Channels: 2 x 2 AES/EBU channels
- Input (Optional DARS): 1 x female XLR (switchable with analog input channels 15 and 16 at quad speed)
- Output: 1 x male XLR (duplicate of analog output channels 15 and 16 at quad speed)
- Word Clock Input: 1 x BNC 75Ω (switchable termination)
- Word Clock Output: 1 x BNC 75Ω
Power Supply
- 2 x IEC inputs with retention clips
Network
- 2 x EtherCON NE8FBH (also compatible with standard RJ45 connectors)
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
FAQs
What is your return policy?
All refunds and returns are determined by the manufacturer's terms of sale. Change-of-mind refunds are not accepted, but all valid warranty claims will be managed by AKA Acoustics in compliance with consumer law.
How long will it take to receive my order?
Freight lead times will be provided upon order confirmation. Standard items typically ship within 4–6 weeks, while custom orders may take 6–12 weeks.
Is my payment information secure?
Yes, all payments are securely processed through Stripe and are protected under their Terms of Service. AKA Acoustics do not store any payment information ourselves.
How are freight costs calculated?
Freight costs are determined at the time of quotation to ensure accurate pricing based on your specific order. For any questions, please email sales@akaacoustics.com
How can I contact support?
For account inquiries, email accounts@akaacoustics.com. For order support, email sales@akaacoustics.com.